RECREATIONAL WINCH'S
VRS V9500 VEHICLE RECOVERY SYSTEMS 9500lbs WINCH
In a tight spot the VRS V9500 can be depended on to deliver.
•
powerful 4300kg pulling power•
fast line speed under loadIn the
extremest of conditions this high speed, powerful winch has the muscle to haul your, vehicle back on track - fast.This is a serious vehicle recovery winch for the serious off-roader.
Features
•
Textured UV and Corrosion Resistant Finish•
Sealed to resist water penetration•
Stainless steel hardware and fittings•
Heavy duty sealed high amperage contactor controller•
Multi segmented cam activated brake•
Designed in Australia for the WorldSPECIFICATIONS
Rated line pull:
9500 Lbs (4310kgs) single line.Motor:
Series wound 6.0 hp /4.4kw,12V DC 8.1 hp /6.0kw,24V DCGear Train:
3 stage planetaryGear rati o:
216:1Clutc h:
Sliding ring gearBraking acti on:
Automatic in the drumBatt ery:
Recommended 650 CCA minimum for winchingBatt ery LEAD :
25mm2,72 (1.83m)Fair lead:
4-way Roller fairleadWir e rope:
5/16”×92’(8.3mm ×30m)Synthetic Rope:
(Optional) 10mm x 26mDr um si ze:
2.5”×9.0”(64mm×224mm)Dim ensi ons:
23”×6.6”×8.4”(552mm×168mm×214mm)Mounti ng bolt patt ern:
10”×4.5”(254mm×114.3mm)N.W:
Wire Rope 86 lbs (39kgs)N.W:
Synthetic Rope (Optional) 68 lbs (31kgs)
M8000 SELF-RECOVERY WINCH
Compact. Tough. An outstanding value for
trucks, sport utility vehicles and Jeeps.
The M8000, with its 4.8-hp Series Wound motor and 3-stage
planetary geartrain, packs 8,000 lbs. of pulling power to get the job done.
Available with either 80' of wire rope and hawse fairlead or 100' of wire rope
and roller fairlead. Pulls a fast 8 ft. per minute at rated load.
M8000
SPECS/PART NUMBERS
Part
Number: PN 20910 CE (12V DC) 80' wire rope and hawse
fairlead
Part
Number: PN 26502 CE (12V DC) 100' wire rope and roller
fairlead
Part
Number: PN 265032 CE (24V DC) 100' wire rope, roller fairlead,
safety hook and thimble
Rated Line
Pull: 8000 lbs. (3630 kgs.) single-line
Motor:
12V 4.8 hp, 24V 2.1 hp, Series
WoundTM
Remote
Control: Remote switch, 12' (3.7m) lead
Geartrain: 3-Stage Planetary
Gear
Ratio: 216:1
Lubrication: Aeroshell #17
Clutch
(freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive
Cone
Drum
Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
Weight: 74 lbs. (34 kgs.)
Wire
Rope: 80', 5/16" diam. (24m, 8mm diam.) or 100', 5/16" diam.
(30m, 8mm diam.)
Fairlead for
PN 20910: Hawse
Fairlead for
PN 26502, 265022, 265032: Roller
Recommended
Battery: 650 CCA minimum for winching
Battery
Leads: 2 gauge, 72" (1.83m)
Finish: Argent Gray Powder
Coat
Nuts/Bolts: PN
39625
12V DC PERFORMANCE SPECS
Line
Pull
Lbs.(Kgs.)
Line
Speed
FT./min(M/min.)
Motor
Current
Pull by
layer
layer/Lbs(Kgs.)
0
42(12.8)
80 amps
1/8000(3629)
2000(910)
16(4.88)
200 amps
2/7280(3302)
4000(1810)
11.9(3.63)
285 amps
3/6670(3026)
6000(2720)
9.79(2.98)
350 amps
4/6230(2826)
8000(3630)
8.01(2.44)
435 amps
24V DC PERFORMANCE SPECS
Line
Pull
Lbs.(Kgs.)
Line
Speed
FT./min(M/min.)
Motor
Current
Pull by
layer
layer/Lbs(Kgs.)
0
27.3(8.32)
46 amps
1/8000(3629)
2000(910)
17.1(5.21)
99 amps
2/7460(3384)
4000(1810)
12.6(3.84)
145 amps
3/3980(3166)
6000(2720)
10.3(3.14)
190 amps
4/6620(3003)
8000(3630)
8.8(2.68)
235 amps
Above performance specs are based on first layer of
drum
Lbs.(Kgs.)
FT./min(M/min.)
Current
layer/Lbs(Kgs.)
Lbs.(Kgs.)
FT./min(M/min.)
Current
layer/Lbs(Kgs.)
XD9000 SELF-RECOVERY WINCH
A long-time best seller, the XD9000's compact body and separate control pack lets it work effectively in very tight spaces.
It uses the 4.6 hp Series WoundTM motor and three-stage planetary gearing offered on most of our winches, so torque and line speed are outstanding. A quiet, double-durable winch, pure and simple.
| XD9000 SPECS/PART NUMBERS |
| Part Number: PN 28500 CE (12V DC) , PN 265012 CE (24V DC) |
| Rated Line Pull: 9000 lbs. (4080 kgs.) single-line |
| Motor: 12V 4.6 hp, 24V 2.5 hp Series WoundTM |
| Remote Control: Remote switch, 12' (3.7m) lead |
| Geartrain: 3-Stage Planetary |
| Gear Ratio: 156:1 |
| Lubrication: Aeroshell #17 |
| Clutch (freespooling): Sliding Ring Gear |
| Brake: Automatic Direct Drive Cone |
| Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm) |
| Weight: 78 lbs. (35 kgs.) |
| Wire Rope: 100', 5/16"diameter (30m, 8mm diameter) |
| Fairlead: Roller |
| Recommended Battery: 650 CCA minimum for winching |
| Battery Leads: 2 gauge, 72" (1.83m) |
| Finish: Argent Powder Coat |
| Nuts/Bolts: PN 39625 |
| CE Winches: CE products are designed to meet European Standards. CE winches include CE labels, manuals, roller fairlead, safety hook and thimble. |
| 12V DC PERFORMANCE SPECS | |||
|
Line
Pull Lbs.(Kgs.) |
Line
Speed FT./min(M/min.) |
Motor Current |
Pull by
layer layer/Lbs(Kgs.) |
|
0 |
38(11.6) |
70 amps |
1/9000(4082) |
|
2000(910) |
14.4(4.39) |
180 amps |
2/8190(3715) |
|
4000(1810) |
11(3.35) |
255 amps |
3/7500(3402) |
|
6000(2720) |
8.67(2.64) |
330 amps |
4/7010(3180) |
|
8000(3630) |
6.88(2.10) |
415 amps |
|
|
9000(4080) |
6.38(1.94) |
460 amps |
|
| 24V DC PERFORMANCE SPECS | |||
|
Line
Pull Lbs.(Kgs.) |
Line
Speed FT./min(M/min.) |
Motor Current |
Pull by
layer layer/Lbs(Kgs.) |
|
0 |
22.5(6.86) |
46 amps |
1/9000(4082) |
|
2000(910) |
14.5(4.42) |
93 amps |
2/8190(3715) |
|
4000(1810) |
11(3.35) |
131 amps |
3/7500(3402) |
|
6000(2720) |
9.1(2.77) |
169 amps |
4/7010(3180) |
|
8000(3630) |
7.9(2.41) |
207 amps |
5/6570(2980) |
|
9000(4080) |
7.4(2.26) |
226 amps |
|
Above performance specs are based on first layer of drum
Winch Dimensions: 21.8" L. x 6.3" D. x 7.6" H.
(555mm L. x 160mm D. x 193mm H.)
Mounting Bolt Pattern:
10.0" x 4.5" (254mm x 114.3mm)
M8274-50 SELF-RECOVERY WINCH
Loved by off-roaders who compete, it's our fastest winch. No load retrieval speed for the M8274-50 is 73.4 feet per minute and that's not all.
At 150 feet of 5/16" cable, it also has a very long line capacity. Its unique spur-gear drive train and upright design are totally rugged. Its braking system delivers smooth operation with superior heat dissipation. Roller fairlead, remote control on 12-ft. lead, free spool clutch and battery cables are included.
| M8274-50 SPECS/PART NUMBERS |
| Part Number: PN 38631 CE (12V DC) , PN 375832 CE (24V DC) |
| Rated Line Pull: 8000 lbs. (3630 kgs.) single-line |
| Motor: 12V 4.6 hp/3.43kw, 24V 2.5 hp/3.43kw, Series WoundTM |
| Remote Control: Remote switch, 12' (3.7m) lead |
| Geartrain: Spur Gear |
| Gear Ratio: 134:1 |
| Lubrication: 6 oz. SAE 30 (non-detergent) |
| Clutch (freespooling): Sliding Motor Pinion Gear |
| Brake: Automatic, disc type |
| Drum Diameter/Length: 3.5"/8.5" (9cm/22cm) |
| Weight: 110 lbs. (50 kgs.) |
| Wire Rope: 150', 5/16" diameter (46m, 8mm diam.) |
| Fairlead: Roller |
| Recommended Battery: 650 CCA for winching |
| Battery Leads: 2 gauge, 72" (1.83m) |
| Finish: Argent Gray Powder Coat with Clear Coat |
| Nuts: PN 7616, L/W: PN 2146 |
| Bolts: PN 7165 |
| CE Winches: CE products are designed to meet European Standards. CE winches include CE labels, manuals, roller fairlead, safety hook and thimble. |
| 12V DC PERFORMANCE SPECS | |||
|
Line
Pull Lbs.(Kgs.) |
Line
Speed FT./min(M/min.) |
Motor Current |
Pull by
layer layer/Lbs(Kgs.) |
|
0 |
73.4(22.4) |
55 amps |
1/8000(3629) |
|
2000(910) |
22(6.71) |
190 amps |
2/7460(3384) |
|
4000(1810) |
12(3.66) |
275 amps |
3/6980(3166) |
|
6000(2720) |
9.50(2.90) |
350 amps |
4/6620(3003) |
|
8000(3630) |
6.10(1.86) |
450 amps |
5/6290(2853) |
| 24V DC PERFORMANCE SPECS | |||
|
Line
Pull Lbs.(Kgs.) |
Line
Speed FT./min(M/min.) |
Motor Current |
Pull by
layer layer/Lbs(Kgs.) |
|
0 |
65(19.8) |
24 amps |
1/8000(3629) |
|
2000(910) |
23(7.01) |
96 amps |
2/7460(3384) |
|
4000(1810) |
17(5.18) |
149 amps |
3/6980(3168) |
|
6000(2720) |
13(3.96) |
203 amps |
4/6620(3005) |
|
8000(3630) |
7.9(2.41) |
273 amps |
5/6290(2855) |
Above performance specs are based on first layer of drum
Winch Dimensions: 16.5" L. x 8.5" D. x 15" H.
(420mm L. x 220mm D. x 381 mm H.)
Mounting Bolt Pattern:
10.0" x 4.5" (254mm x 114.3mm)
THE WINCH YOU WANT NOT HERE ? MANY MORE AVAILABLE JUST EMAIL ME FOR A QUOTE !
CONTACT US NOW !